Skip to content

Production and workshop management software, built into your ERP Workshop work, recorded on the spot and signed off

ANTASY IT (a.it) builds workshop and production modules inside custom ERPs: repair and inspection orders filled in on a tablet, values locked once entered, approval by the office, and equipment followed unit by unit with its inspection dates. The workshop module we built for TSS Company in Sfax works this way.

Orders
Repair · Inspection · Service
Controls
PIN sign-in · Locked values · Approval
Running at
TSS Company
Last reviewed

Overview

What is workshop management software, and who is it for?

Workshop management software records the work done on each item that comes into a workshop: who did it, what was checked or replaced, and who approved the result. It suits repair, service and inspection workshops whose reports carry safety or legal weight. ANTASY IT builds it into the same ERP as stock, customers and invoicing.

Many workshops already have a system, and it is made of paper: a pre-numbered report booklet, a clipboard per job, a technician’s handwriting that the office retypes at the end of the day. It works until someone needs to prove what was done on a given unit, on a given date, by whom.

A workshop module keeps the paper form’s logic and its numbering, but captures the values where the work happens. The office stops retyping, and every value has an author and a time.

How it works

How does a repair order move through the workshop?

This is the flow running in the TSS Company ERP, a fire-safety and marine equipment company that services life rafts and fire extinguishers.

  1. 01

    Draft

    created by the office

  2. 02

    In progress

    filled in by the repairer

  3. 03

    Closed

    handed back for decision

  4. 04

    Approved or refused

    by the office, with a reason

Illustrative · statuses of a repair order in the TSS Company ERP
  1. The office opens the order

    It chooses the report type, the customer company or vessel, the repairer and the number pre-printed on the paper booklet, so paper and screen refer to the same report.

  2. The repairer signs in with a PIN

    On the workshop tablet, a code and nothing else. Codes are stored hashed, must be unique, and repeated failed attempts are blocked. Each repairer sees only the orders assigned to them.

  3. Values are locked as they are saved

    The screen follows the paper form. Once a value is saved it is locked, with who entered it and when. A repairer who needs a change asks the office.

  4. The repairer closes the order

    The order goes to the office for a decision and can no longer be edited from the workshop.

  5. The office decides

    It approves, or refuses with a mandatory reason. It can correct a locked value or reopen the order; each correction is written into the order’s history.

Reports

What do the inspection reports record?

The report type decides which form is generated. Two types run today, each a faithful copy of the client’s paper sheet.

  • Report type 1

    Life-raft service report

    Raft and vessel identification, release unit, valve checks, a working-pressure test with time, temperature and pressure at start and end, gas cylinder weights against the theoretical full weight, test results and the condition found.

  • Inside report 1

    Raft equipment pack

    Every item of the raft’s equipment on its own line: quantity, checked, replaced, and expiry date where one applies.

  • Report type 2

    Fire-extinguisher sheet

    One line per extinguisher and vessel: type, capacity and each check of the paper sheet in its own column, plus an observation.

Copying the paper form field for field is deliberate. Technicians recognise it at once, the office can compare a printed booklet and the screen line by line, and nothing has to be re-learnt to start using the tablet.

Equipment and stock

How is the workshop linked to equipment and stock?

In the TSS Company ERP, every serialised unit has a record: serial or lot number, manufacturing and commissioning dates, last and next inspection dates, its depot or the vessel it is on, and a status. ANTASY IT keeps these records in the same database as stock, customers and invoices, so the workshop never works from a separate list.

Unit status
In stock, sold, assigned, under repair or retired.
Vessel status
Active, laid up, under repair or out of service.
Depots
Main, workshop, secondary or consignment, with transfers between them tracked until received.
Inspection dates
Last and next inspection per unit, the basis for planning the next visit.

How we build it

How do we build a workshop module?

In the workshop, not in a meeting room. These are the steps we follow, drawn from the TSS Company module.

  1. 01

    Collect the paper

    Every form, booklet and sheet in use, with real filled-in examples.

  2. 02

    Decide who fills what

    Which values the technician enters, which the office sets, and who may correct them.

  3. 03

    Set the locks

    What freezes on save, what needs approval, and what goes into the history.

  4. 04

    Test on the tablet

    With the technicians, on the device they will use, before anything goes live.

  5. 05

    Run and adjust

    Hosted, backed up and changed when a form or a rule changes.

Manufacturing

What about bills of materials and manufacturing orders?

An honest answer, since this page is also found by manufacturers.

What is in production today, and what is not

The module running today is workshop-shaped: repair, inspection and service orders on equipment. Bills of materials, manufacturing work orders, material planning and production costing are not part of it.

If you manufacture, those objects are modelled with the same building blocks (documents, statuses, locked records, stock movements), and we will tell you during discovery whether a packaged manufacturing module would serve you better. See custom ERP or Odoo.

Running in production

Where does it run?

At TSS Company, a fire-safety and marine equipment company in Sfax, whose workshop records its repair and inspection reports in the same ERP that runs its sales, stock and tax.

TSS Company

Fire-safety and marine equipment and services · Sfax

Repair orders with life-raft and fire-extinguisher reports, PIN sign-in on a workshop tablet, values locked on save, office approval and a full history, inside an ERP that also runs sales, purchasing, stock and tax.

What we built

FAQ

Workshop software questions

Will technicians actually use a tablet instead of paper?

They are more likely to when the screen looks like the sheet they already know and signing in takes a code, not an email and password. That is how the TSS Company module was designed. We also plan a test of the screens with the technicians, on their own tablet, before go-live.

What happens if a technician saves a wrong value?

The value is locked, so the technician cannot change it alone; they ask the office. The office can correct any locked value, and the correction is recorded in the order’s history with who made it and when. Nothing disappears silently, which is the point of locking values in the first place.

Can you reproduce our own inspection or repair forms?

Yes. Each report type generates its own form, copied field for field from your paper version, including the pre-printed booklet number. TSS Company runs two report types today, life rafts and fire extinguishers. A new type is added as a new form on the same order flow, with its own lock and approval rules.

Who can approve or refuse a closed order?

Only office users with the right role, never the repairer who did the work. A refusal requires a written reason, and only the office can reopen an order. In the TSS Company ERP, repairers cannot change an order’s status, assignment or decision fields, even by editing the form directly.

Can we see when each unit is due for its next inspection?

Yes. Each serialised unit stores its last and next inspection dates, alongside its serial or lot number, its location in a depot or on a vessel, and its status. The equipment list shows each unit’s next inspection date and filters by status, item and depot, which gives the office the basis for planning visits.

Do you build bills of materials and manufacturing orders?

Not in the module running today, which is workshop-shaped: repair, inspection and service orders. Manufacturing objects can be built with the same approach, and we will say at discovery whether a packaged manufacturing module would fit you better. We prefer that conversation to a claim we cannot show running.

Still retyping workshop reports? Send us one

A blank form and a filled-in one are enough for a first conversation about your workshop module.